DE ⁄ EN
kontakt

Analogue clocks

with flat, nicely formed clock housing and slim, tapered or straight clock hands behind a protection cover, indoors and outdoors, are the main focus in our standard selection.

We make these clocks with impulse-controlled or self-adjusting slave clock systems, synchronised, quartz battery or DCF clock systems. Depending on the clock system, we deliver them with hour/minute/second hands and also one-sided for wall mounting or double-sided with a ceiling or wall bracket. Our selection also includes special designs like vapour-proof or explosion-proof clocks.

Choice of products

BS-GR40
Accessories
Downloads: Product sheet   Details

  • Round protective grid
  • To be used for analogue clocks with up to 40 cm diameter
  • Especially solid welded construction
  • 50x3 mm wire mesh (waved)

Technical specifications: 

  • Size: 450 mm diameter
  • Total height: 90 mm
  • Colour: silver according to RAL 9006
  • Extra charge: Special painting in RAL colour according to customer wishes
Product enquiry via e-mail

BS-GR60
Accessories
Downloads: Product sheet   Details


  • Round protective grid
  • To be used for analogue clocks with up to 60 cm diameter
  • Especially solid welded construction
  • 50x3 mm wire mesh (waved)

 

 

Product enquiry via e-mail

BS-PKN
Accessories
Downloads: Product sheet   Details

  • Plexiglas cupola
  • Crystal clear ball protection unit made of Acryl glass (PMMA)
  • Especially suitable for protection of analogue clocks up to 40 cm diameter of series N, W and T
  • Elastic, limited shock-resistant
  • Weather- proof and resistant to age
  • Immune to scratches compared to other thermoplasts
  • Resistant against acids and bases of middle concentration (exempt from Ethanol, acetone and Benzol, i.e. no cleaning with alcohol or solvents)

Technical specifications:

  • Size: 48 cm diameter
  • Thickness: 4 mm
  • Refraction index: 1.492 (for comparison: 1.45 ... 1.9 at mineral glass)
Product enquiry via e-mail

HM-DCF2
Accessories
Downloads: Product sheet   Details

  • The DCF-77 radio synchronisation antenna is a longwave receiver which take over the telegram of the atomic clock in Frankfurt (Mainflingen), Germany. The telegram is sent permanently and includes additional to precise time information about year and date.
  • Das demodulated time signal is sent as 5 mA serial current loop every second.
  • The DCF antenna is built-in into plastic case which can be mounted outdoors.
  • Mounting angle for detailed adjustment and secure fixing on customer-provided pole is included in delivery
  • The antenna shall be mounted in direction Germany
  • Fitted with check LED for indication of signal quality

Technical specifications:

  • Frequency: 77.5 kHz
  • Connection cable: 2- or 3-conductor
  • Max. cable length: 300 m
  • Ambient temperature: -20 °C to +50 °C
  • Protection class: IP55
  • Dimensions (WxHxD): 110 x 110 x 65 mm
Product enquiry via e-mail

PW-N23
Accessories analogue clock Series N
Downloads: Product sheet   Details


  • Use: For analogue clocks of series N with Ø 23 cm
  • Assembly: Mounting of two clocks back to back
  • Length: Ceiling/wall to upper end of clock max. 240 mm
  • Length in steps adjustable
  • Option: Other lengths for extra costs
Product enquiry via e-mail

PW-N40
Accessories analogue clock Series N
Downloads: Product sheet   Details


  • Use: For analogue clocks of series N with Ø 40 cm
  • Assembly: Mounting of two clocks back to back
  • Length: Ceiling/wall to upper end of clock max. 240 mm
  • Length in steps adjustable
  • Option: Other lengths for extra costs
Product enquiry via e-mail

PW-N30
Accessories analogue clock Series N
Downloads: Product sheet   Details


  • Use: For analogue clocks of series N with Ø 30 cm
  • Assembly: Mounting of two clocks back to back
  • Length: Ceiling/wall to upper end of clock max. 240 mm
  • Length in steps adjustable
  • Option: Other lengths for extra costs
Product enquiry via e-mail

PW-V23
Accessories analogue clock Series V
Downloads: Product sheet   Details


  • Use: For analogue clocks of series V with 23 cm side length
  • Assembly: Mounting of two clocks back to back
  • Length: Ceiling/wall to upper end of clock 110 mm
  • Fixing: 1 square tube 25x25 mm outside
Product enquiry via e-mail

PW-V30
Accessories analogue clock Series V
Downloads: Product sheet   Details


  • Use: For analogue clocks of series V with 30 cm side length
  • Assembly: Mounting of two clocks back to back
  • Length: Ceiling/wall to upper end of clock 140 mm
  • Fixing: 2 tubes, mounting plate 250x100 mm
Product enquiry via e-mail

PW-V40
Accessories analogue clock Series V
Downloads: Product sheet   Details


  • Use: For analogue clocks of series V with 40 cm side length
  • Assembly: Mounting of two clocks back to back
  • Length: Ceiling/wall to upper end of clock 200 mm
  • Fixing: 2 tubes, mounting plate 250x100 mm
Product enquiry via e-mail